The PT100 temperature sensor is used optionally for registering the ambient temperature close to the sample and prior a measurement with the Hot Disk® instrument. It is especially useful when using a TCU as the sample temperature might differ from that registered by the integrated TCU thermometer. Note that this PT100 temperature sensor is not used for automatic temperature control of our TCU units.

The PT100 sensor is connected to the PT100 temperature sensor input of the Hot Disk® instrument, and it can be used down to -80°C and up to 400°C.

PT100 Temperature Sensor
Temperature
Minimum -80°C
Maximum 400°C
Sensor size
Length 40 mm
Diameter 6 mm
Cable length 3.0 m
Cable connector Lem 4 pin (male)

Other Temperature Control Units (TCUs)

Hot Disk Continuous-Flow Cryostat (78 K to RT)
  • New
Continuous-Flow Cryostat
-195°C (78 K) to Room Temperature

This floor-standing cryostat uses a continuous flow of liquid nitrogen from a storage dewar for cooling, and a resistive wire element for heating. The system consists of four separated parts: a cylindrically shaped vacuum chamber, with a liquid nitrogen vessel on top, both integrated into a floor-stand; a temperature control unit; a turbomolecular pump; and a self-pressurized dewar.

Learn more >
Hot Disk Low to High Temperature Chamber Front
  • New
Low-to-High Temperature Chamber
-60°C to 300°C

This floor-standing TCU uses a two-stage refrigeration system with R404A and R23 refrigerants for cooling, and a fan with a heating element around it for heating. It comes with a box-shaped temperature chamber with a volume of 50 liters.

Learn more >
Bath Circulator Bath with Sample Holder
Bath Circulator
-40°C to 200°C

This floor-standing bath circulator uses a refrigeration system with EU-approved, Propene (A45) coolant medium for cooling, and an electrical heating element for heating. The bath circulator has a corrosion-resistant stainless steel reservoir of 12 liters for the bath volume. The box-shaped working area of this temperature vessel is 6 liters.

Learn more >
Convection Oven
Convection Oven
Room Temperature to 300°C, 400°C, 500°C or 600°C

This benchtop convection oven uses a fan with a heating element around it for heating. The oven comes with a box-shaped temperature chamber with an optional volume of 30 liters or 60 liters.

Learn more >
Muffle Furnace
Muffle Furnace
Room Temperature to 800°C

This benchtop ceramic muffle furnace uses a resistive wire-wound element for heating. The furnace comes in a box-shaped temperature chamber with a volume of either 4 liters or 6 liters.

Learn more >
Small Tubular Furnace
Non-Split Tube Furnace
Room Temperature to 1000°C

This smaller benchtop horizontal tube furnace of non-split-type uses multiple zone metal coil elements for heating. The furnace has a removable tube-shaped and vacuum-sealed temperature chamber of inner diameter 50 mm.

Learn more >
Large Tubular Furnace
Split Tube Furnace
Room Temperature to 1000°C

This larger benchtop horizontal tube furnace of split-type uses multiple zone metal coil elements for heating. The furnace has a removable tube-shaped and vacuum-sealed temperature chamber of inner diameter 100 mm. The split-type design reduces tube cooling time.

Learn more >
PT100 Temperature Sensor
-80°C to 260°C

The PT100 temperature sensor is used optionally for registering the ambient temperature close to the sample and prior to a measurement with the Hot Disk® instrument. It is especially useful when using a TCU as the sample temperature might differ from that registered by the integrated TCU thermometer. Note that this PT100 temperature sensor is not used for automatic temperature control of our TCU units.

Learn more >