Kapton-insulated

Handling odd-shaped and limited-sized samples

Our range of Kapton-insulated Hot Strip sensors for Isotropic, Anisotropic, Slab, One-dimensional and Structural Probe measurements, with operating temperature from -238 °C (35 K) up to 300 °C (400 °C in vacuum or oxygen-free environment), are listed in the following table, followed by photos and detailed dimensions further down:

Sensor model:	Width (mm) x Length (mm):
5108	6.4 x 20.0
101474	16.0 x 19.0
101472	16.0 x 59.0

All Kapton-insulated Hot Strip sensors can be acquired with or without attached cables. The standard polymer-clad cables can be used in a temperature range of -20 °C to +50 °C while silicone-clad cables are available for use in the wider range of -60 °C to +180 °C. For cryogenic temperatures, thin-diameter silicone-clad cables are offered. Sensors without cable can be mounted in dedicated sensor holders for use up to 300 °C (400 °C in vacuum or oxygen-free environment).

Kapton-insulated Hot Strip Sensors – Standard

Illustration of the Hot Strip Sensor dimensions

Model Dimensions

W = Width of vertical lines
L = Length of vertical lines
A = Effective sensor length

Placeholder for Product Image Coming Soon

Model 5108

W = 6.4 mm
L = 20.0 mm
A = 49 mm

Kapton-insulated Hot Strip Sensor model 1014724

Model 101474

W = 16.0 mm
L = 19.0 mm
A = 50 mm

Model 101472

W = 16.0 mm
L = 59.0 mm
A = 70 mm

Hot Disk® Sensors

Hot Disk® Sensor

Our Kapton-insulated sensors are the most versatile in the Hot Disk sensor portfolio, employed at temperatures from -238 °C (35 K) to 400 °C. They are mechanically highly flexible, and frequently attain a lifetime of several years when employed with care. The Kapton-insulated Hot Disk® sensors are available in seventeen models of different radii to date, catering to a wide range of sample sizes and topical applications.

Teflon-insulated

Hot Disk® Sensor

Our Teflon-insulated sensors are mechanically flexible, geared toward liquid- or high-viscosity immersion and temperatures up to 250 °C. They are designed for use in extreme conditions, such as acidic or corroding environments, or with sticky and reactivate samples. The Teflon-insulated Hot Disk® sensors, today available in six smaller-radii models.

Mica-insulated

Hot Disk® Sensor

Our Mica-insulated Hot Disk® sensors are mechanically inflexible, and designed for measurements at elevated temperatures, typically in the 300 °C to 1000 °C range. Coming in eight models of different radii to date, they are commonly more perishable at higher temperatures, while easily replaced and available in bulk.

Kapton-insulated

Handling odd-shaped and limited-sized samples